Screwdriver Set, 1000V Insulated Slotted and Phillips, 2-Piece
33532-INS
- Screwdriver Set includes one 1/4-Inch Cabinet-Tip (Cat. No. 602-4-INS) and one #2 Phillips-Tip (Cat. No. 603-4-INS)
- Insulated screwdrivers reduce risk with work up to 1000 volts
- Durable, two-layer, molded insulation
- Orange outer coating is flame and impact resistant; white high-dielectric inner coating is bonded to the steel
- Made in USA
- Cushion-Gripâ„¢ handles for greater torque and comfort
- Meets or exceeds IEC 60900 and ASTM F1505 standards for insulation
- Includes non-magnetic tips
The screwdrivers in ÀÇÓÑÉçÇø' 2-Piece Insulated Screwdriver set have two layers of insulation to protect from electric shock. A thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool, while a bright orange outer coating is flame and impact resistant. Klein insulated tools exceed the IEC 60900 and ASTM F1505 standards for insulated tools, and are clearly marked with the official 1000-volt rating symbol.
Specifications
Application:
For Work Near Energized Sources
Special Features:
Flame Retardant and Impact Resistant Handle, Tip-Ident® Handle
Included:
(2) Screwdrivers
Magnetic:
No
Insulated:
Yes
Shank Length:
4'' (10.2 cm)
Material:
Induction Hardened Steel
Handle Material:
High-Dielectric Plastic
Handle Color:
Black
Overall Length:
7.25'' (18.4 cm)
Number of Pieces:
2
Standard:
IEC 60900 and ASTM F1505
Weight:
9.6 oz (272 g)
UPC:
092644335327
Additional Information
Warnings
- Do NOT use to pry or chisel.
- Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
- Because moisture, films and other surface contaminants are conductive, Klein insulated tools must be kept clean, dry and free of any surface contamination.
