Grip for High Strength Cables 0.218-Inch

1692-5

  • Designed for cable sizes from 0.218-Inch to 0.55-Inch (5.54 to 13.97 mm)
  • Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
  • For larger conductors, see our grips with round inside-jaw contour
  • Manufactured from drop-forged, heat-treated steel for excellent durability
  • Made in USA
Videos
Downloads
Images
High-Res JPG
PNG
Interactive Catalog

Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from 0.218-Inch to 0.55-Inch (5.54 to 13.97 mm). When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip. Double V contour reduces the possibility of slippage and damage to the cable.

Specifications
Type:
Chicago Grip
Application:
Extra-High-Strength Cables, Messenger, Guy Strand
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
N
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Double V
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
5.4 lb (2.5 kg)
UPC:
092644471834
Additional Information
Feature Icon klein/wf_grips-doublev-jaw.jpg
Warnings
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.