Nut Driver Set, 1000V Insulated, 9-piece

33524

  • Tool set includes 3/16-Inch, 1/4-Inch, 5/16-Inch, 11/32-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, 9/16-Inch and 5/8-Inch nut drivers
  • Nut Drivers with Full hollow shafts facilitate work on long bolt applications
  • Durable, two-layer, molded insulation protects against electric shock
  • Tip-Ident® quickly identifies nut driver and size
  • Made in USA
  • Highly durable, black, nylon case features custom-fitted tool pockets
  • Replacement case available (Cat. No. 33534)
  • Meets or exceeds IEC 60900: 2012, ASTM F1505-10 standards for insulated tools
1000volt Product Icon
klein-kurve Product Icon
Videos
Downloads
Images
High-Res JPG
PNG
Interactive Catalog

This 9 piece insulated nut driver set features an assortment of popular nut driver sizes. Each are individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools. The highly durable, black nylon case features a zipper closure, custom-fitted tool pockets plus an extra pocket for storage of papers and other items. Made in the USA.

Specifications
Application:
Stacked Circuit Boards, Long Bolt Applications
Number of Pieces:
9
Included:
646-3/16-INS, 646-1/4-INS, 646-5/16-INS, 646-11/32-INS, 646-3/8-INS, 646-7/16-INS, 646-1/2-INS, 646-9/16-INS, 646-5/8-INS, 33534
Measurement Standard:
SAE
Special Features:
Tip-Ident Quickly Identifies Nut Driver Size
Insulated:
Yes
Handle Type:
Cushion Grip
Shaft Length:
6'' (15.2 cm)
Overall Length:
9.75'' to 11.375'' (24.8 to 28.9 cm)
Overall Height:
3.5'' (8.9 cm)
Overall Width:
15'' (38.1 cm)
Standard:
IEC 60900 and ASTM F1505
Weight:
96 oz (2722 g)
UPC:
092644335242
Additional Information
Feature Icon klein/wf_tip-nut-driver.jpg
Warnings
  • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
  • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
  • Wear approved eye protection.
  • Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.
  • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.