Solar Ratcheting Crimper for MC4® Connectors
3010CR
- Crimps MC4® style pins onto 10-14 AWG stranded copper wire
- Adjustable compound action design puts more crimping power into each squeeze
- Built-in ratchet ensures full-cycle crimping for a uniform crimp every time
- Dial adjusts the amount of force applied to the crimp
- Dual-material molded grips provide added comfort
- Unique cavity design provides a consistent crimp from either side of the tool
- Three crimping cavities in one tool: 10 AWG, 12 AWG, and 14 AWG
ÀÇÓÑÉçÇø' Solar Ratcheting Crimper was designed to crimp MC4® style pins onto 10-14 AWG stranded copper wire. Engineered with an unique cavity to crimp consistently on either side of the tool. Molded handles to provide added comfort during extended use.
Specifications
Type:
Solar Tools
Application:
Interface with PV Connector Terminals on 10, 12, and 14 AWG Stranded Wire
Special Features:
Adjustable Side Cam
Overall Length:
8.9'' (2.3 cm)
Overall Height:
0.87'' (2.2 cm)
Overall Width:
3.04'' (7.7 cm)
Material:
Steel
Included:
Solar Ratcheting Crimper
Weight:
1.19 lb (0.5 kg)
UPC:
092644340383
Warnings
- Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
- Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
- Because moisture, films, or other surface contaminants are conductive, Klein tools must be kept clean, dry, and free of any surface contaminants.
- Wear approved eye protection
